By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.
Evergreen Border with Red Bow is a Christmas machine embroidery design with an elongated horizontal composition. Fine gold-toned lines and a dark outline decorate the central bow. Evergreen branches, holly leaves, red berries and gold-toned decorative sprigs extend on either side.
Use this composition near the lower edge of a festive towel, at the ends of a table runner or on textile gifts. The red bow creates a central focal point, while the green branches extend the design along the edge of the item. Seven sizes of one motif are included. These are digital files for an embroidery machine.
Size: 57.1×174.1 mm (2.25×6.85″), Stitches: 13800, hoop: 130×180 mm (5×7″) or 100×300 mm (4×11.81″)
Size: 198.3×64.9 mm (7.81×2.56″), Stitches: 16000, hoop: 140×200 mm (5.5×8″) or 100×300 mm (4×11.81″)
Size: 218.2×71.5 mm (8.59×2.81″), Stitches: 17400, hoop: 140×220 mm (5.5×8.6″) or 100×300 mm (4×11.81″)
Size: 238.2×78.0 mm (9.38×3.07″), Stitches: 19300, hoop: 160×240 mm (6.3×9.45″) or 100×300 mm (4×11.81″)
Size: 258.2×84.5 mm (10.17×3.33″), Stitches: 21200, hoop: 160×260 mm (6.3×10.24″) or 100×300 mm (4×11.81″)
Size: 278.2×91.1 mm (10.95×3.59″), Stitches: 23400, hoop: 100×300 mm (4×11.81″)
Size: 298.3×97.5 mm (11.74×3.84″), Stitches: 25500, hoop: 100×300 mm (4×11.81″)
The dimensions follow the order of the sides shown on the color charts. The first chart shows the design vertically. In a rectangular hoop, align the long side of the design with the long side of the embroidery field. All seven versions fit a 100×300 mm field when oriented accordingly.
Hoops are listed by the store’s nominal categories. Before stitching, compare the file dimensions with your machine’s actual embroidery field and run a boundary check.
Formats: .dat, .dst, .exp, .hus, .jef, .jef+, .pec, .pes, .sew, .shv, .tap, .vip, .vp3, .vp4, .xxx.
| Product type | Digital machine embroidery design |
|---|---|
| Composition | Horizontal evergreen border with a central bow, holly and berries |
| Number of sizes | 7 sizes of one composition |
| Colors and color changes | 6 colors, 6 color changes, 7 stitching stages |
| Palette | Madeira Classic: 1170, 1135, 1146, 1159, 1147, 1035 |
| Delivery | Digital files available to download after purchase |
All seven sizes use six Madeira Classic shades. The squares represent Madeira’s digital swatches; choose your threads by shade number, as screen settings and lighting can affect how the colors appear.
| No. | Color | Madeira Classic thread | |
|---|---|---|---|
| 01 |
|
Madeira Classic 1170 Green |
|
| 02 |
|
Madeira Classic 1135 Lemon |
|
| 03 |
|
Madeira Classic 1146 Orange/Red |
|
| 04 |
|
Madeira Classic 1159 Yellow |
|
| 05 |
|
Madeira Classic 1147 Red |
|
| 06 |
|
Madeira Classic 1035 Maroon |
Stitching sequence: 1170 → 1135 → 1146 → 1159 → 1147 → 1135 → 1035.
Reindeer designs from the same Christmas collection can help you create a coordinated set with red bows, green details and gold-toned accents. Use the border on a towel or table runner and a reindeer on a matching pillow cover, napkin or gift bag.
Machine Embroidery Design |
Machine Embroidery Design |
Machine Embroidery Design |
Machine Embroidery Design |
Before marking the placement, wash and dry the towel according to its care instructions. For waffle-weave fabric, start with a soft, medium-weight cut-away stabilizer underneath and water-soluble topping on top. The backing supports the fabric, while the topping helps keep fine stitches from sinking into the textured weave. Test the material combination on a sample first.
Hoop the layers smoothly, without stretching or distorting them. Support the loose part of the towel so its weight does not pull on the hoop. After stitching, carefully remove the excess topping and dissolve any remnants around the fine evergreen needles according to the topping manufacturer’s instructions. The cut-away stabilizer remains beneath the design.
Helpful reading: hoop sizes and embroidery fields: how to choose a design for your machine.
Will the smallest size fit a 100×170 mm hoop?
No. Its long side measures 174.1 mm, which exceeds a 170 mm field. Suitable categories in the store are 130×180 mm or 100×300 mm. Rotating the design by 90° changes its orientation but does not reduce its size.
Can I stitch the largest version in a 100×300 mm hoop?
Yes, if your machine’s actual embroidery field is 100×300 mm. Align the 298.3 mm side with the 300 mm side of the field. Based on the file dimensions, there is 1.7 mm of total clearance along the length and 2.5 mm across the width, so check the design boundaries before starting. An additional basting box may not fit.
Why is the first chart vertical while the others are horizontal?
They show different orientations of the same composition. The first version measures 57.1×174.1 mm on the chart; after rotating it for horizontal placement, it measures 174.1×57.1 mm. When rotating the design, make sure both bow tails point downward.
How do I position the border on a towel as shown in the photo?
Fold the towel as it will hang and place a full-size paper template on it. Align the center of the bow with the middle of the visible section of the towel, keeping the branches parallel to the lower edge. Measure the distance from the hem to the lowest ends of the bow tails. Before stitching, unfold the towel and check that only the intended layer is under the needle.
Is the design suitable for a terry towel?
A smooth panel or a low pile is preferable for the fine evergreen needles. When stitching directly on terry, use a backing stabilizer and water-soluble topping. Make a test stitch-out on the same type of towel first: a high pile can obscure fine details even when topping is used.
Do I need metallic thread for the gold-toned details?
No. The charts specify Madeira Classic, including shades 1135 and 1159. The gold-toned effect comes from combining a light yellow with a richer yellow. Substituting metallic thread requires a separate test stitch-out and machine settings suited to the chosen thread.
Why are there seven stitching stages but only six colors?
Madeira Classic 1135 is used twice: in the second and sixth stages. Keep the original stitching order so the details overlap correctly. Do not combine repeated colors using automatic color sorting.
Can I reduce the file to fit a 100×170 mm hoop?
Choose a supplied size that fits your machine’s embroidery field. Reducing the design without recalculating the stitches can bring the evergreen needles closer together and alter the density of the bow. If you need another size, request a design adjustment first and test the resulting file before embroidering your item.