Tropical Fan Palm Leaf Machine Embroidery Design – 10 Sizes

By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.

Turn a plain textile into a bold resort-style statement with one sweeping botanical motif. The Tropical Fan Palm Leaf Machine Embroidery Design opens in a broad radial shape, giving totes, cushions, wall panels and garment backs an immediate tropical identity without needing a full floral composition.

The same leaf is professionally prepared in 10 sizes, from 128.0x132.6 mm / 5.04x5.22 in to an oversized 320.1x331.8 mm / 12.60x13.06 in version. Choose a compact size for a tote or pillow accent, a medium version for bedding and curtains, or one of the largest files for a dramatic wall hanging, quilt center or statement back panel.

Color changes the entire character of the motif. Deep emerald creates lush botanical depth; moss or gray-green suits natural linen and calm interiors; bright gold turns the leaf into glamorous tropical décor; and tone-on-tone stitching gives modern textiles a quieter designer finish.

Design Information

Size: 128.0x132.6 mm / 5.04x5.22 in, Stitches: 24418
Size: 138.2x143.1 mm / 5.44x5.63 in, Stitches: 26319
Size: 158.1x163.8 mm / 6.22x6.45 in, Stitches: 30079
Size: 178.1x184.6 mm / 7.01x7.27 in, Stitches: 33959
Size: 198.1x205.3 mm / 7.80x8.08 in, Stitches: 37755
Size: 218.1x226.0 mm / 8.59x8.90 in, Stitches: 41590
Size: 238.1x246.7 mm / 9.37x9.71 in, Stitches: 45497
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .dat, .exp, .vp3, .sew, .xxx

Size: 268.1x277.8 mm / 10.56x10.94 in, Stitches: 51385
Size: 298.1x308.9 mm / 11.74x12.16 in, Stitches: 57402
Size: 320.1x331.8 mm / 12.60x13.06 in, Stitches: 62146
Format: .dst only

At a Glance

The listing contains digital machine embroidery files. A finished embroidered item, fabric, thread, stabilizer and embroidery machine are not included.

Hoop and Embroidery Field Requirements

Check the machine’s real embroidery field, not only the hoop name. The 128.0 mm / 5.04 in, 138.2 mm / 5.44 in, 158.1 mm / 6.22 in, 198.1 mm / 7.80 in, 238.1 mm / 9.37 in and 298.1 mm / 11.74 in widths sit extremely close to common field limits. A machine that reserves an internal safety margin may reject the file even when its nominal hoop dimension appears large enough. Use the next larger hoop whenever possible.

This design does not fit a standard 100x100 mm / 3.94x3.94 in (commonly called 4x4 in) hoop. Rotating the motif does not help because both dimensions of the smallest file exceed 100 mm / 3.94 in.

Recommended Madeira Thread Palettes

The current product page does not publish an official manufacturer-number color chart. The exact Madeira colors below are recommended styling options, not claimed matches to an unpublished source sequence.

The leaf is visually strong enough to work as monochrome embroidery. If the machine preview displays more than one programmed stop, retain the original stitch order and load the same thread at each stop when creating a one-color version. Do not merge or delete stitch blocks unless you have inspected the file in embroidery software.

Choose rayon for a soft, lustrous decorative finish and polyester for totes, garments, cushions or linens that will be washed frequently. Compare colors with a physical thread chart before stitching because monitor settings cannot reproduce thread shades exactly.

Exact Stabilizers for Different Projects

The stabilizer must support both the fabric and the selected size. The largest files contain more than 50,000 stitches, so a backing that works for the smallest version may be insufficient for an oversized wall panel or garment back. Test the complete combination of size, fabric, thread and stabilizer.

Best Projects for the Fan Palm Leaf

• a statement tote bag or beach bag with the leaf centered on the front panel;
• tropical pillow covers and coordinated cushions in emerald, moss, gold or tone-on-tone thread;
• a framed textile panel, wall hanging or quilt center using one of the oversized DST files;
• duvet covers, bed runners, curtain panels and resort-style bedroom textiles;
• the back of a jacket, loose dress, caftan, robe or sweatshirt with sufficient fabric support;
• spa, hotel, beach-house, conservatory and botanical interior décor;
• table runners, wide placemat centers and decorative linen panels;
• summer gifts, housewarming textiles and personalized resort accessories.

For a coordinated collection, repeat the same prepared size on two cushion fronts, then use a larger version on a central wall panel or bed runner. Keep the thread color consistent so the different scales read as one designed interior rather than unrelated projects.

Placement and Composition

Print the selected template at 100% and mark both center axes. On a tote or cushion, place the broad top of the leaf high enough to balance the stem visually while keeping every stitched edge away from seams, piping, zippers and thick hems. On a garment back, test the template on the body before hooping; a broad leaf may look centered mathematically but sit too high once the garment is worn.

Run the machine’s boundary trace before stitching, especially with files whose width leaves less than 2 mm / 0.08 in of total clearance in the nominal field. For large panels, support the weight of the fabric beside the machine so it cannot drag against the hoop during embroidery.

Recommended Machine Settings

1. Use one of the supplied sizes instead of scaling the file extensively in the machine.
2. Test on the same fabric, backing, thread and needle planned for the final project.
3. For Rayon or Polyester No. 40 on stable woven fabric, begin with a fresh 75/11 embroidery needle.
4. For sweatshirt knit or elastic fabric, use a 75/11 ballpoint embroidery needle and permanent cut-away backing.
5. Begin near 600–700 stitches per minute; reduce speed if the large motif causes fabric movement, thread breaks or registration loss.
6. Hoop smoothly without stretching. Support large fabric panels so their weight cannot pull on the moving hoop.
7. Use water-soluble topping only on terry, fleece, velvet or another raised surface.
8. After stitching, support the embroidery while removing tear-away; trim permanent cut-away to a smooth rounded margin.

Do not try to correct puckering by sharply increasing upper tension. First check hooping, stabilizer strength, fabric stretch, needle condition and machine speed. Change one variable at a time after a complete test stitch.

Digital Download and License

After purchase, download the ZIP archive, extract it and transfer the required size and supported format to your embroidery machine. If your device cannot open the archive, use the Royal Present Online ZIP Unzip Tool.

You may use the design for personal projects and finished physical items offered for sale under the Royal Present Embroidery license. The digital files may not be copied, shared, exchanged, published, uploaded, repackaged or resold. Review the Royal Present Embroidery Terms and Conditions of Use for complete terms.

Explore More Botanical Embroidery

Combine this statement leaf with smaller branches and botanical motifs from the Leaves, Hop and Cereals Embroidery Designs Collection. Use the fan palm as the main focal point and reserve narrower foliage designs for towel borders, napkins, pockets and smaller accessories.

Frequently Asked Questions

Does the listing contain 10 different palm leaves?

No. It contains one tropical fan palm leaf motif professionally prepared in 10 different sizes.

Does the smallest size fit a 5x7 hoop?

The 128.0x132.6 mm / 5.04x5.22 in file fits a true 130x180 mm / 5.12x7.09 in embroidery field, but the 128.0 mm / 5.04 in side leaves only 2.0 mm / 0.08 in of total clearance. Check the machine’s maximum accepted design dimensions; use a larger hoop if the machine reserves a safety margin.

Does the design fit a 4x4 hoop?

No. The smallest file measures 128.0x132.6 mm / 5.04x5.22 in, so both dimensions exceed a standard 100x100 mm / 3.94x3.94 in (commonly called 4x4 in) field.

Are all 10 sizes supplied in every format?

No. The first seven sizes, from 128.0x132.6 mm / 5.04x5.22 in through 238.1x246.7 mm / 9.37x9.71 in, are supplied in DST, JEF, PEC, VIP, HUS, PES, DAT, EXP, VP3, SEW and XXX. The three largest sizes are supplied in DST only.

Which thread color works best for a tropical look?

Madeira Classic Rayon 40 No. 1304 Emerald Ivy Green gives a deep polished green, while No. 1189 Moss Green creates a softer natural result. Madeira Polyneon 40 No. 1970 Emerald Green is a practical choice for washable totes and garments.

Can I stitch the palm leaf in one color?

Yes. A monochrome treatment emphasizes the fan-shaped silhouette. If the file contains more than one programmed stop, use the same thread at each stop and preserve the original stitch order.

Which stabilizer should I use for a tote bag?

For stable canvas, use strong support such as Madeira Weblon Plus Fusible 70 g/m² cut-away, especially for larger versions. Test first because tote fabrics vary greatly in weight, coating and stretch.

Can I resize the design?

Use one of the 10 prepared sizes whenever possible. Strong percentage scaling can alter stitch length, density, pull compensation and the shape of the radiating leaf sections. A substantially different size requires professional stitch recalculation.

May I sell items embroidered with this design?

Yes. Finished physical items may be sold within the Royal Present Embroidery license. The digital design files themselves may not be copied, shared, traded, uploaded or resold.

What will I receive after purchase?

You will receive a ZIP archive containing the prepared machine embroidery files. This is a digital product; no stitched sample, thread, fabric, stabilizer or physical item is shipped.