By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.
Vintage Floral Monogram M with Rosebuds is a machine embroidery design for elegant personalization with the character of an antique botanical initial. The tall capital M is framed by flowing scrolls, fine leafy stems and delicate rosebuds, creating a balanced ornamental composition rather than a plain embroidered letter.
The design is especially effective when stitched in two related gold shades. A luminous main gold defines the letter and principal scrollwork, while a quieter antique-gold accent reveals the rosebuds, foliage and smaller details. The result resembles softly aged gilding and works beautifully on white, ivory, black, burgundy, forest green and navy textiles.
It is visually and technically separate from the other Royal Present product titled Monogram M with Roses, so the two files should not be confused.
Size: 113.8x88.0 mm (4.48x3.46 in), Stitches: 11307
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, .vp3, .xxx
The download includes one design size. This is a digital machine embroidery file; no finished item, fabric, thread or stabilizer is included.
| Design size | Minimum embroidery field | Suitable hoop field |
|---|---|---|
| 113.8x88.0 mm (4.48x3.46 in) | at least 114x88 mm | 120x120 mm, 130x180 mm (5x7 in) or larger |
Important: this monogram does not fit a standard 100x100 mm (4x4 in) embroidery field because it is 113.8 mm wide. Rotating the design by 90 degrees does not solve the problem: one side would still measure 113.8 mm. Check the usable embroidery field supported by the machine, not only the outer dimensions of the physical hoop.
The production worksheet identifies two source colors and three sequential color blocks. These are original chart labels, not Madeira thread numbers.
| Block | Original chart label | Function in the design |
|---|---|---|
| 1 | Gold (003) | First section of the letter and ornament |
| 2 | Pale Yellow (210) | Contrasting floral and ornamental details |
| 3 | Gold (003) | Final section of the main gold ornament |
Keep the original block order Gold → Pale Yellow → Gold. The first and third blocks use the same thread, but they remain separate stages of the embroidery sequence.
The original worksheet does not assign Madeira numbers. The palette below is a recommended substitution for an elegant two-tone gold finish and is intentionally listed separately from the source chart.
| Color | Exact thread | Use for | Visual effect |
|---|---|---|---|
| Bright gold | Madeira Classic Rayon 40 No. 1024 Gold Rush | Original block 2: rosebuds, foliage and smaller accent details | Warm, luminous gold with a smooth rayon sheen |
| Muted antique gold | Madeira Classic Rayon 40 No. 1173 Autumn Gold | Original blocks 1 and 3: dominant letter M and principal scrollwork | Quieter gold-brown that adds vintage depth without a harsh contrast |
No. 1024 Gold Rush and No. 1173 Autumn Gold create visible tonal separation while remaining part of the same warm gold family. No. 1173 is a muted gold-brown rather than a pale lemon yellow, which gives the monogram a more expensive antique finish. Screen swatches are approximate; make the final choice with a physical Madeira color card and a test stitch on the project fabric.
Madeira Classic Rayon 40 is viscose rayon, not metallic thread. It provides a silk-like luster and handles the fine botanical details more easily than many metallic threads. Use No. 1024 in original blocks 1 and 3 and No. 1173 in block 2. Do not merge or reorder the blocks in the machine file.
| Fabric or project | Backing | Topping | How to use it |
|---|---|---|---|
| Linen, quilting cotton or stable décor fabric | Madeira Cotton Soft 50, tear-away, 50 g/m² | Not required | Hoop the fabric and one layer together. For loosely woven linen, use two layers placed in different grain directions. |
| Terry towel | Madeira Cotton Soft 60, tear-away, 60 g/m² | Madeira Avalon, water-soluble topping, 20 μm | Cotton Soft supports the 11,307 stitches from below; Avalon keeps the fine leaves, rosebuds and open scrollwork above the pile. |
| Satin, poplin or another fine stable woven fabric | Madeira CMX Fusible, fusible tear-away, 48 g/m² | Not required on a smooth surface | Fuse to the wrong side without stretching the fabric. The adhesive layer reduces shifting and rippling around the tall letter. |
| Knit, stretch velour or another elastic fabric | Madeira Weblon Plus Fusible, fusible cut-away, 70 g/m² | Madeira Avalon on a raised or pile surface | Trim Weblon Plus to a 5–8 mm margin after stitching. Use a Ball Point embroidery needle No. 75/11 on knit fabric. |
| Finished item that cannot be hooped | Madeira StickOn, self-adhesive tear-away, 50 g/m² | Madeira Avalon for terry or velour | Hoop StickOn alone, expose the adhesive area and float the item on the marked centerlines. Run the machine’s boundary trace before stitching. |
For a luxury product photograph, stitch the letter M on a white terry towel with a broad smooth band. Use Madeira No. 1024 for the main letter and scrolls and No. 1173 for the botanical accents. Soft side lighting will reveal the rayon sheen while the muted second shade prevents the gold treatment from looking flat or overly yellow.
Print the design template at 100% scale and mark both centerlines. On a towel, center the monogram within the smooth horizontal band. On a pillowcase, bag or garment, first identify the area that will remain visible after assembly; the technical center of a pattern piece is not always its visual center.
Use the machine’s hoop-tracing or design-boundary function before stitching. Allow for seams, zippers, hems and bulky edges. When embroidering a set of towels or linens, keep the same distance from the lower edge and the same monogram height on every piece.
For Madeira Classic Rayon 40, use a new Embroidery needle No. 75/11 and begin at approximately 600–700 stitches per minute. Avoid maximum speed through the narrow scrolls, fine leaves and rosebud details. Adjust upper-thread tension only after testing the complete combination of fabric, thread, needle and stabilizer.
Do not stretch the fabric in the hoop. Stabilize it first, then hoop it smoothly and firmly without distortion. Remove tear-away backing in small sections while supporting the stitches with your fingers.
After purchase, download the ZIP archive from your Royal Present Embroidery account. Unzip the archive before selecting the format supported by your embroidery machine. If your device cannot open the archive with its standard tools, use the Royal Present online ZIP extraction service.
You may use the design for personal projects and for finished physical items offered for sale. The digital embroidery file itself may not be shared, published, traded or resold.
Use the M monogram alone for a personal initial or combine it with coordinating letters from the Vintage Floral Monograms with Roses collection. For a complete coordinated set, view the All Vintage Alphabet with Roses Bundle.
No. A 100x100 mm (4x4 in) embroidery field is too small because the design is 113.8 mm wide. Use a field of at least 114x88 mm; practical standard options include 120x120 mm or 130x180 mm (5x7 in).
The original worksheet uses two colors in three blocks: Gold (003), Pale Yellow (210), then Gold (003) again. The Madeira numbers in this description are recommended substitutions, not numbers from the original production chart.
Yes. A one-color version will look elegant and graphic, but two related shades reveal more of the rosebuds, leaves and ornamental structure. Even when using one thread, preserve the original sequence of blocks in the file.
Yes. Install a Metallic needle No. 90/14, reduce the speed to approximately 500–600 stitches per minute and test first. For the most reliable result, use metallic gold in original blocks 1 and 3 and Madeira Classic Rayon 40 No. 1173 in the finer second block.
Use Madeira Cotton Soft 60 tear-away beneath the towel and Madeira Avalon 20 μm water-soluble topping above the pile. Avalon may be omitted when the design is stitched entirely on a smooth, pile-free woven band.
Significant scaling of a finished machine file can alter stitch density, stitch length and the clarity of the small botanical details. A substantially different exact size requires professional stitch recalculation rather than simple percentage scaling.
Yes. Finished physical items embroidered with the design may be sold under the Royal Present Embroidery license. The digital embroidery files may not be shared, published, traded or resold.
Vintage Floral Monogram M with Rosebuds – Machine Embroidery Design
I just stitched out the Vintage Monogram (multicolor) and it is stunning. I'll be ordering more letters, I am sure. Gorgeous.
Vintage Floral Monogram M with Rosebuds – Machine Embroidery Design
Absolutely stunning - so very happy with my purchase.
Vintage Floral Monogram M with Rosebuds – Machine Embroidery Design
I'll buy some more.
I am interested in finding out if this is available in a 3 inch square? and who I can talk to acquire the license to use the full alphabet commercially.
Royal P.
from Royal Present Embroidery