By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.
Size: 186.0x198.0 mm (7.32x7.80 "), Stitches: 37255
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .sew, .exp, .dat, vp3, xxx
We can't make smaller the size of this particular design.
Using these patterns do not forget about the right embroidery technology. It is very important. In this case, we are speaking about correct stabilization, choosing the appropriate type of thread and needles.
The stabilizer should be chosen according to the type of fabric and machine embroidery pattern. The most popular stabilizer for cross-stitch projects is cut-away. Most often it is used with a glue of a temporary fixation.
The correct hooping of the fabric and the stabilizer are also very important. You need to tighten the screw to not stretch it excessively. Also there some situations when there are traces after hooping on the fabric. Especially it is noticeable on such fabric as velour, silk, suede, leather. What to do with such a problem? First, you need to hoop the stabilizer. Then you should attach the fabric on top with pins or using temporary spray adhesive.
Mind please that the embroidery process should be designed to the smallest details. Carefully think about all its stages. It helps you to make your embroidery quality and durable.
Notes: These designs can be used only for mega hoops. It allows you to embroider the pattern at one time. So, you don`t need to divide the pattern more. If you don`t have a mega hoop, you may buy it at the official website of the producer of your embroidery machine.
If you decide to place these magnificent cross-stitch letters on a pillowcase use this short instruction:
1. Take the required size piece of the fabric.
2. Using a printed template and marking items, mark up the design, as you usually do.
3. Take a medium-weight cut-away stabilizer, cut the desired fabric from the roll.
4. Spray a glue of a temporary fixation on the stabilizer and attach the fabric face up.
5. Please note that a lot of fabrics have a pile on top that can “pierce” through stitches. To prevent this, take a self-adhesive water-soluble stabilizer, for example, Solufix.
6. Peel off the protective film from above and stick it to the fabric.
7. Hoop the fabric with the stabilizers.
8. Embroider the design.
9. Cut off the excess stabilizer below.
10. Wet the product to dissolve the upper stabilizer in water.
11. Sew the cushion.
Also, Cross-stitch Capital Letters for mega hoop machine embroidery designs will be the great ways of making gifts.
To achieve a perfect result, use Madeira Cotton Fix Tear Away Stabilizer. It is made of non-woven tear-off material. Moreover, it is already sticky and protected by paper. Or you can use Madeira Cotton Stable Tear Away Stabilizer, which is glued with an iron and tear off at the end of embroidery.
Your download link is for a ZIP file, please unzip the folder and extract the files. YOU CAN READ HOW TO UNZIP FILES IN THE F.A.Q. SECTION
If you want to open our designs on the computer, you will need embroidery software. Otherwise, the embroidery designs can be transferred directly to your embroidery machine for your use.
You may not copy, share or sell the design files including but not limited to email or any other electronic transmission. Even if a design is free to you, you do not have the right to copy, share or sell the designs as stated herein. Each person must purchase his or her own rights.