Machine Embroidery Designs Zebra prints for quilting
Machine Embroidery Designs Zebra prints for quilting is a set of nine designs for hoops 100x100 mm (4x4"). You can embroider many different African-style décor options for your home using it.
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 12652
Size: 98.3x98.3 mm (3.87x3.87 "), Stitches: 14010
Size: 98.2x98.3 mm (3.87x3.87 "), Stitches: 13540
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 12843
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 15693
Size: 98.2x98.4 mm (3.87x3.87 "), Stitches: 13520
Size: 98.2x98.3 mm (3.87x3.87 "), Stitches: 13431
Size: 98.5x98.2 mm (3.88x3.87 "), Stitches: 12732
Size: 98.1x98.5 mm (3.86x3.88 "), Stitches: 12807
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, xxx
We suggest you to embroider this pattern on the decorative pillow from the faux fur. Embroidery on faux fur is an interesting project. The rules of embroidery on faux fur are similar to the rules of embroidery on terry towels.
Machine embroidery on faux fur
You should take into account many aspects when making such embroidery projects. Pay attention to such things as fabric density, pile type, design type, method of stabilization and embroidery positioning. In addition, it is necessary to choose the thread type and the suitable needle correctly.
It is recommended to choose not a dense faux fur with a low pile. Since a very dense cloth is hard to hoop. And if the design is also dense, then on such a fabric embroidery will look like a body armor. In addition, for embroidery machine to transfer the design to a three-layer sandwich from a dense fabric, and two stabilizers - this is a big load. In turn, a high-pile fabric will cause the confusing stitches in it.
We have prepared for you an instruction how to embroider Optical illusion Machine Embroidery Design on a faux fur.
1. Take the printed design template in full size and the air-erase pen.
2. Put the printout in the place where you will want to embroider. Move the center point. Then run the axes direction lines.
3. Leave the template. Take a tear-away medium stabilizer or self-adhesive Madeira Cotton Fix Tear-away stabilizer.
4. Cut the cloth of the stabilizer more than the size of the hoops.
5. Spray the glue of a temporary fixation and attach it to the back of the fabric in the place where you will have embroidery. To glue a tear-away self-adhesive stabilizer, just remove the protective film.
6. If you are embroidering on the terry towel surface itself, apply a water-soluble stabilizer, for example, Madeira Avalon Plus, on the front side. Hoop this sandwich. If you are embroidering on the edge of the product, topping is not necessary.
7. Place the hoops in the machine.
8. Embroider the design.
9. After embroidery, cut off the excess stabilizer from below.
10. If you have used the top water-soluble stabilizer, remove it by washing the product.
We hope that with this instruction you can easily Optical illusion Machine Embroidery Design on faux fur fabrics.
Free Machine Embroidery Designs Machine Embroidery Patterns Online
Welcome to our Internet Machine Embroidery designs Store and Free Machine Embroidery Patterns online.
Here you will find exclusive designs for machine embroidery as well as cross stitching that will allow you to create stunning pieces for your home or unique gifts for any occasion.
Interior embroidery is a new trend in home design. Having just a few embroidered pieces in your house or apartment will allow you to significantly improve the look of your space as well as creatively express your own personal style.
Royal Present Embroidery offers and sells digitized machine embroidery designs
Royal Present Embroidery reserves the right to change the Sewing Machine Embroidery Patterns or remove them altogether from the online embroidery shop without any previous warning. Don’t forget to download the files with the designs as soon as you have purchased them. Please, make sure to choose the size and format of the file, compatible with those of your embroidery machine.
For the download to be successful, the settings of your Windows should be right. Also, for older operating systems, your computer needs to have the right software for ZIP files. After you have downloaded the design in a ZIP file, unzip the folder to extract the files.
If you haven’t received the design you ordered. Log into your personal account (My account) and download the file from there.
In the archive you buy, there are .jpg files, which are the instruction for each embroidery design. You need to make sure, that this instruction has a 100% scale. This is written in a left upper corner of the instruction. If the design doesn’t fit on one A4 sized sheet, the instruction can contain from few sheets. They are usually named (1-1), (1-2) and etc., which are after the name of the actual design. For example, if the name of the design is RPE-1002, then the instruction can consist of several pages with a name: RPE-1002(1-1), RPE-1002(1-2) and etc.
To check the position where you plan to embroider, you can print out the instruction and try in on the textile. In the instruction, you will see the centre of the embroidery and the horizontal and vertical position. You can mark the centre on the textile so its more comfortable to embroider where you want.
IT IS IMPORTANT! We never divide our designs! If your hoops are too small to embroider big designs, you can divide our designs in a program, which is for your machine.
Happy shopping !