Crocodile Bodybuilder Machine Embroidery Design - 2 sizes

By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.

Size: 98.0x96.4 mm (3.86x3.80 "), Stitches: 22684
Size: 117.5x115.6 mm (4.63x4.55 "), Stitches: 30487
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .sew, .exp, .dat, vp3, xxx

Crocodile Bodybuilder Machine Embroidery Design perfectly cope with the task of decorating or repairing products from denim. This situation is especially relevant for moms of little supermen or cowboys. Ripped jeans, hardened jackets, erupted green specks of grass, or other consequences of mischievous games will no longer make you puzzle how to save a thing.

Crocodile Bodybuilder perfectly cope with embroidery directly on the denim or with the creation of a stylish patch.

Consider each of the ideas.

Denim Embroidery / Repair old clothes

1. To repair torn products it is necessary to close the hole with sewing non-woven cloth. Turn the product inside out, cut a patch of non-woven fabric in size rather than a hole. Iron the interlining to the product.

2. Unstitch the seam of the product, if you need to hoop, for example, jeans.

3. Denim is strong enough, which means that even the most complex designs can be embroidered on it.

4. Use Madeira Cotton Fix Tear-away stabilizer. If you use Madeira stabilizers, note that they do not have an average density stabilizer. For all types of embroidery, the standard stabilizer Madeira Super Strong is used.

5. For embroidery on denim fabric use a pointed needle #75/11 or #75.

Create a patch using Crocodile Bodybuilder Machine Embroidery Design

So, to get such a stylish patch for your little superhero's clothes, follow these steps:

1. Take a base fabric for the patches, or usual felt fabric, preferably black.

2. Hoop the fabric.

3. Take the tear-away stabilizer. The ideal is self-adhesive Madeira Cotton Fix Tear-away stabilizer. Glue it to the fabric. To do this, simply tear off the protective film and apply a sticky side to the wrong side of the base. For black fabric is best to take a black stabilizer.

4. Embroider the design.

5. Tear off excess stabilizer and cut the fabric close to the contour.

Your patch is ready! It remains only to attach it to the product. You can sew a patch with a sewing machine, stitching a line around the contour, or by hand.

Nevertheless, we recommend using a special adhesive base for the stripes. It consists of two layers. One layer is matte and the other is glossy.

1. Cut the canvas a little bigger than your patch.

2. Attach it with the glossy side down, matte up to the wrong side of the patch.

3. Iron the film. After about a minute, it will stick to the patch.

4. To glue the patch to the fabric, simply tear off the protective coating and apply a sticky side to the fabric in the required place. Then iron the patch with again.

This design has been tested and reviewed to ensure top quality. Test stitch the design, or portions of it, before stitching it onto your final item, as results may vary depending on fabric and stabilizer combination.

Please don't sell or trade the embroidery file.