Cat Face machine embroidery design – 2 sizes

Cat Face machine embroidery design - 2 sizes

Cats have long been considered a wise and omniscient animal. It is not for nothing that the ancient Egyptians drew all-seeing cat’s eye. In addition, cats symbolize such qualities as ingenuity, endurance, sensual beauty and attentiveness. People believe that the figure of a cat has a solar meaning and is associated with solar heat.

Now cats are favorites of many people who consider them family members and take care accordingly.

The image of a cat is extremely popular in embroidery and is widespread. We can often observe Cat Machine Embroidery Designs, for example, cat’s face, or a curved figure of a cat in embroidered paintings, towels, textiles and knitwear.

Cat face machine embroidery design is a more comic and unusual image of a cat. It is ideal for embroidering on summer clothes, or for dyeing children’s blouses.

Today we want offer you to embroider Cat face machine embroidery design on a knitted cardigan. Such a cheerful and original cardigan will be suitable for you, and, for example, for your daughter. You can also embroider twin identical cardigans. As sets of clothes for children and their parents are now in trend.

For many needlewomen, embroidery on knitwear is not an easy task, requiring special attention and skills. Therefore, often, needlewomen do not like to embroider on such cardigans. However, we will tell you how to make the process of such embroidery perfect.

Cat Face machine embroidery design – 2 sizes

Visit-our-online-store

Size: 128.2×100.7 mm (5.05×3.96 “), Stitches: 7426
Size: 98.0×77.0 mm (3.86×3.03 “), Stitches: 5134

Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, .vp3, xxx

For such embroidery, you need:

~ Knitted cardigan
~ Medium-weight cut-away stabilizer
~ Thin water-soluble stabilizer
~ Fabric glue stick
~ Ruler
~ Air-erase pen
~ Machine embroidery pattern

Before embroidery, wash the cardigan, as the fabric can shrink after the first washing. Then, when the cardigan is already dry, take the ruler and measure the distance from the shoulder to the first upper button. Therefore, you can easily choose the appropriate size of the design.

~ If you have not found a suitable size among those that we offer, order a service for resizing the design.

Next, print the template, which we provide in the archive to each design. Attach it to the fabric, mark the center point and the X and y direction lines. Repeat the same steps on the other side. We recommend you to print two templates at once for this. It will give an opportunity to fully assess the situation, and see whether the embroidery will be positioned symmetrically.

The third stage will be the stabilization of the fabric. First, you need to take from the roll the required amount of cut-away stabilizer. Remember that a tightly cut stabilizer should be considerably larger than the hoop size. Next, spray the glue of a temporary fixation on the stabilizer, wait a few seconds and glue the fabric to it. Do it with the wrong side. On the front side of the fabric, put a water-soluble stabilizer in the place where the embroidery will be. Hoop the fabric together with the stabilizers in the embroidery frame. Place the embroidery frame in the machine so that the needle is in the center of the embroidery. Embroider the design. Cut off the excess side of the stabilizer. Then gently tear off the water-soluble film on top. If you notice the remains of small pieces of water-soluble stabilizer, do not worry. To remove them sufficiently to soak the cardigan in warm (but not hot) water.

Cute and unusual Cat face machine embroidery design is ready. See our others Cat Machine Embroidery Designs.

Successful embroidery!

You may also like

Machine Embroidery Design Gray cat face

Machine Embroidery Design Gray cat face